Time Coating Meter
- Magnetic induction (F) method is used to measure the thickness of non-magnetic coating on ferrous metal
- Eddy current (N) method is used to measure the thickness of non-conducting coating on non-ferrous materials
- Automatic recognition of substrate
- Automatic selection of measuring methods
- 5 statistical ways: Mean values / Max. values / Min. values / testing numbers.(No.) / standard deviations (S.DeV)
- Upper-lower limit setting and sound alarm
- Data output to printer or PC by RS232 cable
- 500 readings can be stored
- 2 measuring modes: continuous / single
- 2 stop ways: Manual/automatic
-
Technical Specification
Probe types F N Measuring methods: magnetic induction eddy current Measuring range: 0 to 1250 μm 0 to 1250 μm
0 to 40μm (for chromeplate on copper)Minimum resolution: 0.1μm Tolerance : One point calibration ±(3%H 1) ± (3%H 1.5) H means the thickness of tested piece Two points calibration ±[(1~3)%H 1] ±[(1~3)%H 1.5] H means the thickness of tested piece Measuring condition Min. curvature radius (mm) Convexity 1.5 Convexity 3 Min. testing area diameter (mm) Φ7 Φ5 Critical thickness of substrate 0.5 0.3 Power supply Battery AAA 1.5V (2pcs) Working Temperature 0-40°C Dimensions 110mm×50mm×23mm Weight 100g